CC2652R: Is Hardware Memory watchpoint not supported in Segger J-Link plus debugger?

Mehul Dalal

Part Number: CC2652R
Other Parts Discussed in Thread: SEGGER

We are using Segger J-link plus based debugger for CC2652 MCU. Whether hardware memory watchpoint supported in Segger J-Link plus?

over 3 years ago

0 Mehul Dalal over 3 years ago

Expert 2140 points

Also, if it is supported, let me know the procedure of putting up a hardware memory watchpoint.

0 AartiG over 3 years ago in reply to Mehul Dalal

TI__Guru**** 173310 points

Please check if the following thread is helpful: https://e2e.ti.com/support/tools/ccs/f/81/t/559191

0 Mehul Dalal over 3 years ago in reply to AartiG

Expert 2140 points

Sorry, but I am unable to get a clear answer for the latest CCS9.1.0 for memory watchpoint using Segger J-link plus.

Please clarify.

Also, will XDS100 only work for the memory watchpoint.

0 desouza over 3 years ago in reply to Mehul Dalal

TI__Guru**** 168422 points

Hi,

Mehul Dalal said:
I am unable to get a clear answer for the latest CCS9.1.0 for memory watchpoint using Segger J-link plus.

Sorry, the situation is the same as the previous version shown in the thread pointed by @AartiG: hardware watchpoints are not directly supported by the CCS interface and J-Link.

Regards,

Rafael

Other wireless

Other wireless technologies forum

CC2652R: Is Hardware Memory watchpoint not supported in Segger J-Link plus debugger?