Other Parts Discussed in Thread: CC1120
Hi
Since we need to parse the PWM code, the CC1125 must be in "pass-through mode".
However, CC1125's pass-through mode will introduce the following problems:
1. The chip of the main platform needs to read GPIO continuously to obtain the transmitted signal, so it cannot sleep;
If you do not sleep, the power consumption will not reach the standard.May I ask if there is any plan to solve this problem?
2. From the datasheet,in pass-through mode,CC1125 does not detect and process the leading codes and synchronization words of GFSK encoding,
So can we parse the GFSK-encoded data ourselves?
thanks!