CC1352R: Mioty Sensitivity

Thomas Kunz

Part Number: CC1352R
Other Parts Discussed in Thread: MIOTY,

Hey community,

I would like to know about the expected sensitivity for the use of mioty with the cc1352R.

In the datasheet, I can find the sensitivity values for the use of the IEEE 802.15.4g (-110 dBm) and the SimpleLink LRM (-121 dBm).

But I can't find information about the mioty sensitivity.

Is there a document I can refer to?

thanks in advance,

Thomas

over 3 years ago

0 RGW over 3 years ago

TI__Mastermind 29570 points

Hi,

Preliminary answer is the sensitivity limit will be equal or better than -121 dBm.

Will confirm the exact level soon.

Regards,

Richard

0 Elin W over 3 years ago

TI__Genius 14845 points

Hi Thomas,

Unfortunately, the mioty parameters are not in the datasheet but I can share some preliminary results with you. The preliminary results for CC1352 are in the range of about -128 dBm @ 10% PER (Core, No Repetition, -127 dBm at 255 Byte Downlink). This can be improved by about 0.5 dB by increasing the LNA current somewhat.

Thanks,
Elin

Sub-1 GHz

Sub-1 GHz forum

CC1352R: Mioty Sensitivity