• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 53 subscribers
  • Views 178 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC1201: WM-Bus stack for CC1201

Eran Shternlib
Intellectual 890 points
Part Number: CC1201
Other Parts Discussed in Thread: CC1350, CC1310

Hi team,

I am looking for a stack implementation of Wireless M-Bus standard (EN13757-4:2014-2).

I found such implementation for CC11x and CC13x family in TI web site.

 

Is there also such a stack for CC1201?


Thanks
Eran

  • 0
    TI__Guru**** 317180 points

    TI only provide a stack for CC13x0. For CC120x, contact Stackforce to see if they have something available for the MCU you want to use. 

  • 0 in reply to TER
    TI__Intellectual 890 points

    Hi,
    I read in TI.com that there is such a solution:

     

    Software solutions:
    wM-Bus stack – For customers who want to shorten their development cycle and develop metering products TI provides an OMSv4.1.2 compliant and field proven wM-Bus stack. This is a full SW solution, supporting the SimpleLink Sub-1 GHz and Dual-Band wireless MCUs. The stack is provided “free-of-charge” and royalty-free when used with CC1310 and CC1350.

    NOTE: Multiple other TI hardware platforms, including the two-chip solution of the MSP430 + CC112x and CC120x high performance transceivers are also supported, specifically the 868 and 169 MHz bands.

  • 0 in reply to Eran Shternlib
    TI__Guru**** 317180 points

    Yes, it exist a solution but you have to contact Stackforce that write the Stack to check the availability.