My customer plan to develop a module using CC1312R and has the following question:
This module includes only the CC1312R and its circuitry as defined in the LAUNCHXL eval board:
- CC1312R MCU
- Power supply stage with its external buck converter circuit
- 2 quartz
- Ballun circuit in order to convert the 3 RF output to a unique antenna output. (the antenna adaptation circuit will be outside of the module)
In the specification, our customer requires that the module shall be compliant with the following regulations:
- ETSI EN 301 489-1 V2.2.3
- ESTI EN 300 220-2 V3.2.1
- EN 54-25 from November 2008
In the CC1312R datasheet, it is mentioned that the device is suitable for systems targeting compliance with following worldwide radio frequency regulations:
- ETSI EN 300 220 Receiver Category 1.5 and 2, EN 303 131, EN 303 204 (Europe)
- FCC CFR47 Part 15
- ARIB STD-T108
I didn’t find any note regarding ETSI EN301 489-1 V2.2.3 and EN54-25 regulation.
Do you know if this device with its own circuitry is suitable for targeting compliance with these two regulations ?
Thanks Josef