Other Parts Discussed in Thread: CC3120
Dear Team,
We are a startup from Indian and developing an IoT product. We have developed our prototype using CC26X2 and CC3120 launch pads and CC26X2 &CC3120 are interfaced using SPI.
Now, We are in the process of designing our PCB. We have included Jtag pins for flashing our firmware in CC26X2 and should we also need to include jtag or other flashing pins in our PCB to flash the service software in CC3120 or when we buy CC3120 from online stores such as Mouser, Digikey CC3120 comes with service pack? If you could clarify this doubt, it would be a great help for us.
Regards,
Viknesh Vadivel
