WL18XX-CERTIFICATION: Receiver Blocking test

srideep s

Hello,

We are using WL18MODGB in our product and currently going for ETSI(CE) certification.

1. As per the test lab to perform receiver blocking test DTM software is required. Please guide us on procedure to perform receiver blocking test.

2. How to enable adaptivity for WiFi/BT? we are using wifi calibrator tool and hcitool respectively for other tests.

Thank you,

Srideep.

0 Matthias Wagner1 over 1 year ago

Hello everyone,

we are having the same issues. The commands for the WiFi tests are easier to get but the BT and BTLE TEst commands i couldn't find.

There are some old links here in the Forum but they do not work anymore. For example how do we activate the hoping mode with BT Classic in the Test?

We only found this command for TX:

hcitool cmd 0x3f 0x01ca 0x62 0x09 0x01 0x00 0x07 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

But are unsure if its BTLE or Classic?

It would be great if you could link us the correct guide with commands for BT/BTLE TEsting.

Thanks and greetings.

Matthias

0 Seong Kim over 1 year ago

Hello Srideep,

Please see the related threads below

BR,

Seong

0 Matthias Wagner1 over 1 year ago in reply to Seong Kim

As mentioned in my post the links in these older Posts are often not working anymore.

Are there newer links and descriptions?

0 Seong Kim over 1 year ago in reply to Matthias Wagner1

Hey Matthias,

That page was turned into a document which you can download here.

BR,

Seong

Wi-Fi forum