This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: WL1831MOD
We are planning to use WL18xx module in our design, and it going to be configured as Access point mode.
We want to measure the RSSI signal strength value on AP when it's connected to wifi client. Do we have any API or method to capture this RSSI values?
May be you can try running iw station dump command "iw dev wlan1 station dump"
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Saurabh N:
Thanks for the suggestion.
When two stations are connected to AP, this command "iw dev wlan1 station dump" will dump the datas from both the stations?
Captured RSSI values will be from station side value?
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.