CC1352P: Will CC1352P supports matter?

shiv patil

Genius 3356 points

Part Number: CC1352P
Other Parts Discussed in Thread: CC1352R

Hello Community,

Recently I had come to know about the matter & CHIP (Connected home over IP).

I would like to know,

1. Will CC1352 supports the matter or CHIP SDK?

If yes,

As per my knowledge, the CHIP communicates over IPs.

2. How the Zigbee platform used to support the IPs in-network?

Regards,
Shiv Patil.

over 2 years ago

0 YiKai Chen over 2 years ago

Guru 735455 points

1. According to https://github.com/project-chip/connectedhomeip/tree/master/examples/lock-app/cc13x2x7_26x2x7, I think you have to use CC13x2x7 or CC26x2x7 devices instead of CC1352P for CHIP and most documents are on github

2. Zigbee usually need a hub to bridge the ZCL data to internet.

0 shiv patil over 2 years ago in reply to YiKai Chen

Genius 3356 points

Hello YiKai Chen

As the CHIP example supports the CC13X2 family. Why we are not able to use the CC1352P for the development

CC1352P supports both Zigbee & Thread protocol.

Is there any specific reason not to go with CC1352P?

+1 YiKai Chen over 2 years ago in reply to shiv patil

Guru 735455 points

I suppose this is about resource constrains.The CC13x2x7 or CC26x2x7 is pin compatible with, and functionally identical to, their respective CC13x2x1 or CC26x2x1 devices but with an additional 352 kB of flash memory and extra 64 kB of RAM.

0 Toby Pan over 2 years ago

TI__Mastermind 28490 points

YK is correct.

In addition, the CC1352R may be used as the NCP for the border router (https://openthread.io/guides/border-router).

Zigbee & Thread

Zigbee & Thread forum

CC1352P: Will CC1352P supports matter?