problem when compile sample projects in z-stack for cc2530 2.5.1a

Hi Anh,

First, if you are starting with Z-Stack I would recommend using the latest Z-Stack release. If you are building ZigBee Home Automation devices I would recommend to start with Z-Stack Home-1.2.0 on the web page www.ti.com/z-stack. 

Still, if you using Z-Stack-2.5.1a I would recommend installing the Z-Stack again (you can get Z-Stack-2.5.1a from the Z-Stack home page http://www.ti.com/tool/z-stack&DCMP=HPA_RFIC_General&HQS=Other+OT+z-stack)

Then I would recommend opening a sample app (Sample light for example at "C:\Texas Instruments\ZStack-CC2530-2.5.1a\Projects\zstack\HomeAutomation\SampleLight\CC2530DB") using the IAR version 8.10.4 or newer version like IAR 8051v8.20.

Ensure that IAR is not code limited versions of IAR. 

Also, if you have the option "Output List file" checked uncheck that option. Let me know if that resolves the issue.

Let me know if this helps.

Regards

Hi anh,

Z-Stack 2.5.1a uses the IAR version 8.10.4 to build the library. I would suggest you download it from http://www.iar.com/Products/Wireless-solutions/Tools-for-TI-wireless/ and try again.

Hi Anh,

For Z-Stack-Home-1.2.0, can you try reinstalling and using the IAR versions:

- For CC2538 EWARM 6.50.5 
- For CC2530 EW8051 8.20.2 

Regards

Hi anh,

You can refer to  http://e2e.ti.com/support/low_power_rf/f/158/t/304927.aspx 

thanks!

i uses 8.30.3, and it works

thanks. i use 8.20.2 and error does not exit anymore :)