Compiler/CC1110EMK433: Programming 8051

Nuno Penelas

Intellectual 275 points

Part Number: CC1110EMK433

Tool/software: TI C/C++ Compiler

Hi,

I'm starting to develop a project with CODE BLOCKS to program the 8051 from the CC1110.

Can someone show me, for example, how to put a led flashing through this IDE.

Best regards

Nuno Penelas

over 6 years ago

0 TER over 6 years ago

TI__Guru**** 317180 points

As far as I know we haven't delivered any support files for this IDE. Do you know for a fact that it supports CC1110? Even if it supports a generic 8051 the IDE needs to have some information about the device (register addresses etc)

0 Nuno Penelas over 6 years ago in reply to TER

Intellectual 275 points

Dear TER for lapse I forgot to say I am using the SDCC along with CODE BLOCKS where it contains information for the 8051.

0 TER over 6 years ago in reply to Nuno Penelas

TI__Guru**** 317180 points

We haven't software written for this platform but the examples we have could be found under:
www.ti.com/.../cc1110-cc1111dk

Other wireless

Other wireless technologies forum

Compiler/CC1110EMK433: Programming 8051