Part Number: TDA3
Hi,
When I did the check IBIS model of TDA3x with tool (ibischk) of IBIS Open Forum, there so many warnings.
Why has these warnings occurred? Do I have to modify the IBIS model my self.
the warnings are as follows:
~~~~~~~~~~
IBISCHK6 V6.1.3
Checking tda3x_abf.ibs for IBIS 5.1 Compatibility...
WARNING -
Model IQ1833_V_10P_1P8_M#1: POWER Clamp : Typical value never becomes zero
WARNING -
Model IQ1833_V_10P_1P8_M#1: POWER Clamp : Maximum value never becomes zero
WARNING -
Model IQ1833_V_5P_1P8_M#2: POWER Clamp : Typical value never becomes zero
WARNING -
Model IQ1833_V_5P_1P8_M#2: POWER Clamp : Maximum value never becomes zero
NOTE (line 1655) - GND Clamp Typical data is non-monotonic
WARNING -
Model IQ1833_V_10P_3P3_M#3: POWER Clamp : Typical value never becomes zero
WARNING -
Model IQ1833_V_10P_3P3_M#3: POWER Clamp : Minimum value never becomes zero
WARNING -
Model IQ1833_V_10P_3P3_M#3: POWER Clamp : Maximum value never becomes zero
WARNING -
Model IQ1833_V_5P_3P3_M#4: POWER Clamp : Typical value never becomes zero
WARNING -
Model IQ1833_V_5P_3P3_M#4: POWER Clamp : Minimum value never becomes zero
WARNING -
Model IQ1833_V_5P_3P3_M#4: POWER Clamp : Maximum value never becomes zero
WARNING - Model CAMERARX_ADDON_LPRX_M#8: POWER Clamp : Typical value never becomes zero
WARNING - Model CAMERARX_ADDON_LPRX_M#8: POWER Clamp : Minimum value never becomes zero
WARNING - Model CAMERARX_ADDON_LPRX_M#8: POWER Clamp : Maximum value never becomes zero
WARNING - Model CAMERARX_ADDON_ULPRX_M#9: POWER Clamp : Typical value never becomes zero
WARNING - Model CAMERARX_ADDON_ULPRX_M#9: POWER Clamp : Minimum value never becomes zero
WARNING - Model CAMERARX_ADDON_ULPRX_M#9: POWER Clamp : Maximum value never becomes zero
WARNING - Model CAMERARX_ADDON_PD_ON_M#10: POWER Clamp : Typical value never becomes zero
WARNING - Model CAMERARX_ADDON_PD_ON_M#10: POWER Clamp : Minimum value never becomes zero
WARNING - Model CAMERARX_ADDON_PD_ON_M#10: POWER Clamp : Maximum value never becomes zero
WARNING - Model CAMERARX_ADDON_PU_ON_M#11: POWER Clamp : Typical value never becomes zero
WARNING - Model CAMERARX_ADDON_PU_ON_M#11: POWER Clamp : Minimum value never becomes zero
WARNING - Model CAMERARX_ADDON_PU_ON_M#11: POWER Clamp : Maximum value never
:
:
Regards,
Kenshow
