Processor recommendation

ashok b

Other Parts Discussed in Thread: TX517, ADS4128

Hi All,

We are Designing ultrasound device for that we are using dual channel, high voltage Transmitter(TX517) and DAC(ADS4128).

can anyone suggest me a sitara micro- processor part number suitable both interface.

Below attached the our application block diagram.

ADC_DAC_INTERFACE.pptx ADC_DAC_INTERFACE.pptx

over 4 years ago

0 Biser Gatchev-XID over 4 years ago

TI__Guru**** 393215 points

Hi,

The ADS4128 has Double Data Rate (DDR) LVDS interface. None of the Sitara devices support this type of interface. You should consider external conversion circuit (e.g. FPGA) to connect this ADC.

0 ashok b over 4 years ago in reply to Biser Gatchev-XID

Intellectual 440 points

Hi,

Thanks for information.

Can u suggest me any DAC Part number with 200MSPS Sample rate and also which support to Sitara micro- processor or any other micro-processor.

Thanks,

Ashok

0 ashok b over 4 years ago in reply to Biser Gatchev-XID

Intellectual 440 points

Hi,

Please forgot above mail.

Can u suggest me any ADC Part number with 200MSPS Sample rate and also which support to Sitara micro- processor or any other micro-processor.

Thanks,

Ashok

0 Biser Gatchev-XID over 4 years ago in reply to ashok b

TI__Guru**** 393215 points

This is a Processor support forum. ADCs and DACs are supported by a different team on a different forum:

From Sitara point of view, I would say that you need to choose an ADC with a digital interface which is compatible with the Sitara processor you choose. Please note that none of the Sitara devices have differential inputs.

Data converters

Data converters forum

Processor recommendation