hi
i am trying to do the setup for DM365IPNC by APPRO using ipnc2.6.0
i am following the steps given in Users_Guide_IPNC_DM365_.pdf. and i met some problem while starting the DM365 ipnc from appro, could you help me ?
i just coppied the message from console.
----------------------------------------------
Starting kernel
...
Linux version 2.6.18_pro500-davinci_IPNC_DM365_2.6.0 (root@rockingblue-G41MT-S2) (gcc 版本 4.2.0 (MontaVista 4.2.0-16.0.32.0801914 2008-08-30)) #1 PREEMPT Fri Nov 11 16:38:52 1
.....
usb
[success]
isapnp
isapnp
[success]
Simple mixer control
'PGA',0
Capabilities:
cvolume
Capture channels:
Mono
Limits: Capture 0 -
3
Mono: Capture 2
[67%]
Simple mixer control 'Mono
DAC',0
Capabilities: pvolume
pvolume-joined
Playback channels:
Mono
Limits: Playback 0 -
63
Mono: Playback 47
[75%]
SystemInit
success
Schedule manager init
success
ide
ide
[success]
input
input
[success]
scsi
scsi
[success]
done.
Starting portmap daemon:
portmap.
Starting internet superserver:
inetd.
io scheduler deadline
registered
io scheduler cfq
registered
TI DaVinci EMAC: kernel boot params Ethernet address:
00:11:22:33:46:01
sbulla: unknown partition
table
Installing knfsd (copyright (C) 1996
okir@monad.swb.de).
loop: loaded (max 8
devices)
tun: Universal TUN/TAP device driver,
1.6
tun: (C) 1999-2004 Max Krasnyansky
<maxk@qualcomm.com>
CSLIP: code copyright 1989 Regents of the University of
California
netconsole: not configured,
aborting
PPP generic driver version
2.4.2
PPP Deflate Compression module
registered
Davinci EMAC MII Bus:
probed
MAC address is
00:11:22:33:46:01
TI DaVinci EMAC Linux version updated
4.0
davinci-mmc davinci-mmc.0: Supporting 4-bit
mode
davinci-mmc davinci-mmc.0: Using DMA
mode
usbcore: registered new driver
usbfs
usbcore: registered new driver
hub
musb_hdrc: version 6.0, cppi-dma, peripheral,
debug=0
musb_hdrc musb_hdrc: No DMA interrupt
line
musb_hdrc: USB Peripheral mode controller at c38f8000 using DMA,
IRQ
12
Loading iSCSI transport class v1.1-646.<5>iscsi: registered
transport
(tcp)
sbulla: unknown partition
table
mkdosfs 3.0.6 (04 Oct
2009)
unable to get drive geometry, using default
255/63
/dev/sbulla has 255 heads and 63 sectors per
track,
logical sector size is
512,
using 0xf8 media descriptor, with 1024
sectors;
file system has 2 12-bit FATs and 4 sectors per
cluster.
FAT size is 1 sector, and provides 247
clusters.
Root directory contains 512
slots.
Volume ID is 6e067d05, no volume
label.
queue
id:0
umount: /mnt/mmc: not
mounted
killall: dhcpcd: no process
killed
rm: cannot remove `/var/run/dhcpcd-eth0.pid': No such file or
directory
net_search_gateway:eth0, 4A8C0, 0,
1
dns=192.168.5.1
net_search_gateway:eth0, 4A8C0, 0,
1
net_search_gateway:eth0, 0, 105A8C0,
3
dns=192.168.5.1
ERROR: Module g_file_storage does not exist in
/proc/modules
g_file_storage gadget: File-backed Storage Gadget, version: 28
November
2005
g_file_storage gadget: Number of
LUNs=1
g_file_storage gadget-lun0: ro=0, file:
/dev/sbulla
system_server/512[CPU#0]: BUG in local_bh_enable at kernel/softirq.c:196
ApproDrvInit:
9
queue
id:131076
Initializing...
...done
initializing
ApproDrvInit:
8
queue
id:131076
Initializing...
...done
initializing
ApproDrvInit:
6
queue
id:131076
Initializing...
...done
initializing
ApproDrvInit:
10
queue
id:131076
Initializing...
...done
initializing
Play this stream using the
URL:
rtsp://192.168.5.158:8555/PSIA/Streaming/channels/0?videoCodecType=MJPEG
Play this stream using the
URL:
rtsp://192.168.5.158:8557/PSIA/Streaming/channels/2?videoCodecType=H.264
Play this stream using the
URL:
rtsp://192.168.5.158:8554/PSIA/Streaming/channels/1?videoCodecType=MPEG4
Play this stream using the
URL:
rtsp://192.168.5.158:8556/PSIA/Streaming/channels/2?videoCodecType=H.264
ApproDrvInit:
3
queue
id:131076
queue
id:0
queue
id:32769
ApproDrvInit:
2
queue
id:131076
Initializing...
...done
initializing
Play this stream using the
URL:
rtsp://192.168.5.158:8553/PSIA/Streaming/channels/1?videoCodecType=MPEG4
queue
id:0
[16/Nov/2011:07:31:47 +0000] boa: server version
Boa/0.94.13
[16/Nov/2011:07:31:47 +0000] boa: server built Nov 11 2011 at
16:41:51.
[16/Nov/2011:07:31:47 +0000] boa: starting server pid=792, port
80
UDPString=uuid:Upnp-TVEmulator-1_0-00_0006303610</UDN>
INIT: Entering runlevel:
3
error code =
0
device advertisement
succeed.
MontaVista(R) Linux(R) Professional Edition 5.0.0
(0702774)
DM365_IPNC login:
----------------------------------------
I just want to know why did it happen? ( system_server/512[CPU#0]: BUG in local_bh_enable at kernel/softirq.c:196 ) and how do i resolve it ?
please help me,thank you very much