• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 459 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPD4E02B04: ESD protection for 10Gbase-T

toshi-e2e
Genius 4705 points
Part Number: TPD4E02B04
Other Parts Discussed in Thread: ESD321

Hi all, 

Is it possible to use TPD4E02B04 for MDI of 10Gbase-T? 

Regards,
Toshi

  • 0
    TI__Genius 12410 points
    Hello,
    I will check on this. I believe the MDI interface has a working voltage of 5V and in that case it would not.
    However, if you are just referring to the TX and RX line of the Ethernet standard the data rate per line is low and you can use a more robust solution like the ESD321