Recently after installing a windows update on my laptop (Toshiba) my laptop started registering a issue with this controller. In device manager it says that this is a resource issue and I need to free up resources. However, I dont know what to disable/remove in order to free up the resources. Since this was not an issue before the recent update, could their be something in the update that caused this? I am running Vista as an OS.
Can you send a screenshot of the device manager error code and of the Hardware Id?
In reply to Elias Villegas:
Here is a screenshot of the information in device manager. As you can see, a couple of conflicts all arose at the same time, though no new hardware has been installed on the system since purchased in 2007.
In reply to Richard Mann:
I can't see any screenshot, can you attache it again?
Here is the screenshot a a .jpeg. I am also attaching a word doc with the same image inserted in it.0044.DevMan info.doc
Windows should have native support for the TI OHCI Host Controller, so no special driver from TI is required.
Try uninstalling the device from device manager and after that reboot your system and click search for new hardware.
I got a same problem as Richard. However these are some differences. System used is XP. we made our own circuit using TSB81BA3 and TSB82AA2 via CPCI on IPC(Industrial Personal Computer). But once we start the IPC, in Device Manager, the IPC finds 32 IEEE 1394 bus host controller. it is quite strange. Meanwhile in Network Adapter, there are several 1394 adapters all prompting that the drivers is unable to use. and we've tried to update them, but failed. Please help me~~~thxs a lot!!!!!!
In reply to No No:
You do not have the same problem.
There is something wrong with your PCI interface.
What are the bus/device numbers of the 32 controllers?
In reply to Clemens Ladisch:
I thought CPCI interface may be a little different from PCI interface. And each bus controller do not have a special number. There are just 32 same 1394 bus controllers. what's worse, it prompts these are 16 1394 network adapters and all are unable to use. if the 1394 capture card configures correctly, there should be only one 1394 bus controller and one 1394 network adapters, isn't it. So do you have any suggestions? Thx……
The controllers indeed have special numbers, and it's these numbers that are wrong.
So, again: What are the bus/device numbers of these controllers, as shown in Device Manager?
the screenshot is attached.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.