This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: UCC21520
what is the maximum allowed voltage between the pins VSSB and GND. I couldn´t find anything in the datasheet.
I´m interested in this information because I want to use a shunt connected between low side mosfet and PGND.
Thanks for your answer.
I am an applications engineer supporting UCC21520. The VSSB pin (and the whole output channel) is isolated from GND pin and the input side through reinforced capacitive isolation, so the maximum allowed voltage between them is specified in the insulation specifications table of section 6.6 in the datasheet. For example, the DC maximum working voltage between VSSB and GND is listed as 2121V.
You should have no trouble inserting a shunt between the low side MOSFET and PGND, from an isolation standpoint. If the VDDB power supply is referenced to PGND, be careful to ensure that the rising voltage at VSSB does not cause supply voltage instability. Alternately, consider using an isolated or floating supply, with the common connection directly connected to VSSB.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.