SN65LVDS386EVM: Mounting Hole Positions and Dimensions

Ethan Fujioka

Part Number: SN65LVDS386EVM

SN65LVDS386EVM

I am trying to design an enclosure in which I am placing the SN65LVDS386EVM. I have read the user manual and cannot find the dimensions of the mounting holes and any information on the dimensions of the board. Can I get the placement of the mounting holes and their dimensions?

over 5 years ago

0 Yaser Ibrahim over 5 years ago

TI__Genius 10250 points

Hello Ethan,

I am trying to locate one of these EVMs to measure the mounting hole dimensions for you. I will get back to you as soon as I get my hand on this EVM.

Regards,
Yaser

0 Ethan Fujioka over 5 years ago in reply to Yaser Ibrahim

Prodigy 50 points

Hello Yaser,

Thank you for taking a look at my request. Can you give me the following measurements when you have the time please?

- Board length

- Board width

- Board Height

- Distance from edges to each hole center (2 measurements for each hole so 8 measurements in total)

- Hole Diameter

Thank you,

Ethan

0 Yaser Ibrahim over 5 years ago in reply to Ethan Fujioka

TI__Genius 10250 points

Hello Ethan,

Here are the dimensions' values ( in inches) from the board design files (I couldn't find a board to measure).

- Board length: 4"
- Board width: 3"
- Board Height: 0.092"
- Distance from edges to each hole center: 0.25" (all 8 dimensions are the same)
- Hole Diameter: 0.125"

Regards,
Yaser

0 Ethan Fujioka over 5 years ago in reply to Yaser Ibrahim

Prodigy 50 points

Thank you very much for the help Yaser!

Best Regards,

Ethan

0 Krunal Vyas33 over 5 years ago in reply to Yaser Ibrahim

Prodigy 10 points

I would like to know where I can obtain the PCB design files for LVDS receiver SN65LVDS386EVM.

Thanks,

Krunal

0 Yaser Ibrahim over 5 years ago in reply to Krunal Vyas33

TI__Genius 10250 points

Hello Krunal,

We generally don't have the EVM design files on the web. Which files specifically are you asking for?

Regards,
Yaser

0 Yaser Ibrahim over 5 years ago in reply to Yaser Ibrahim

TI__Genius 10250 points

Hello Krunal,

We haven't heard from you for a while. Please let us know if you still need support.

Regards,
Yaser

Interface

Interface forum

SN65LVDS386EVM: Mounting Hole Positions and Dimensions