• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 31 subscribers
  • Views 1010 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ONET1151L DC-Coupled

Jianping Guo
Prodigy 10 points
Other Parts Discussed in Thread: ONET1151L

The datasheet of ONET1151L gives a AC-Coupled application however does not mention DC-Coupled. Does ONET1151L can work with DC-Coupled differential and single-ended driver?  

  • 0
    TI__Genius 16150 points
    Hi Jianping,

    The ONET1151L cannot be DC coupled. AC coupling and inductive pullups to VCC are required. Even, if the application operates at lower speed than 1Gbps some changes to the AC coupling capacitors and bias-T for the laser driver may be required.

    I hope this helps.

    Best Regards,
    Luis Omar Moran
    High Speed Interface Apps
    SWAT Team