• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 33 subscribers
  • Views 825 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MAX3232E-Q1: ESD protection for RS-232 Bus Pins

K.Yaita
Guru 29690 points
Part Number: MAX3232E-Q1

Hi Team,

I understood MAX3232E-Q1 has ESD protection for RS-232 bus pins.
Is there "Equivalent Input and Output Schematic Diagrams" for RIN (RS232) and DOUT (RS232)?
My customer wants to know it if it is possible.

Best Regards,
Yaita / Japan disty

  • 0
    TI__Mastermind 25705 points
    Yaita-san,

    It will take some time to generate equivalent diagrams and update the datasheet. Can you let your customer be more specific what they would like to know? I do my best to give some brief description here. At RIN pin, there is a 5kOhm resistor to GND. After the resistor, some ESD cell is placed at the input stage of the receiver. At DOUT, I think the ESD cell is directly connected to the output node, while driver has push pull structure with current limiting feature. Please let me know if you have further question. Thanks,
  • 0 in reply to Hao L
    Guru 29690 points

    Hi Hao-san,

    Thank you for your support.
    I think your comment is sufficient at this time.
    I will contact you again if I need further information with background of the question.

    Best Regards,
    Yaita

  • 0 in reply to K.Yaita
    TI__Mastermind 25705 points
    Yaita-san,

    From my understanding, there should have no direct DC path from Rin to Vcc. Please let me know if you have any questions.

    Regards,