SN74AVC16T245: Power Calculations

Deep Sharma

Part Number: SN74AVC16T245

SN74AVC16T245
1) page no 5 of datasheet: here it is written contineous current through each Vcca, Vccb and GND; since it contains 2 Vcca , 2 Vccb and 8 GND. So, what should be total current rating for purpose of power calculation.
2) what is the value of resistance in directional circuit for Vin 1.8V (as it is not mentined anywhere)

over 6 years ago

0 ShreyasRao over 6 years ago

TI__Guru 56220 points

Hi Deep,

You can consider the Ioh Iol value as per the electrical characteristics for power calculation. Each IO channel is capable of providing current as rated in the electrical char table.
DIR pin is high impedance input and hence the value of resistance will be very high. It can be calculated using the input leakage current spec from the electrical char table.

0 Deep Sharma over 6 years ago in reply to ShreyasRao

Prodigy 50 points

Shreyas,

thanks for your reply.

But in my design require conversion of 1.8V to 3.3V at all 16 channels.
In such situation what will be the approximate power consumption of this particular component.

Thanks.

Regards,
Deep
1.8V to 3.3V, all 16 channel used

0 Emrys Maier over 6 years ago in reply to Deep Sharma

TI__Guru* 96591 points

Hi Deep,

This application report goes into detail on how to calculate power consumption: CMOS Power Consumption and Cpd Calculation

Logic

Logic forum

SN74AVC16T245: Power Calculations