CCS/TMS320F28069: CPU not halting at HW-Breakpoint

Marc Seiffert

Part Number: TMS320F28069

Tool/software: Code Composer Studio

Dear all,

I am using the xds200 debug probe.

After I was updating my CCS from V8 to V10 the debugger is not halting at any hw breakpoint I am adding in the running mode.

If I suspend and then resume the debugger is halting at the breakpoint.

Also a simple helloworld.c is not working.

Please advise.

Regards,

Marc

0 Vasudha Bhadoria over 5 years ago

Hi,
This query has been assigned to the experts. Due to the US Holiday on 25/05, please expect reply by 26/05 US time.

Thanks
Vasudha

0 Ki over 5 years ago

Hi Marc,

This is a known issue with the EMU pack version that comes with CCSv10.

Please see the link below for more details and for a workaround:

[bad link]

Thanks

0 Marc Seiffert over 5 years ago in reply to Ki

Hi Ki,

thank you for your quick reply.

Unfortunately the link seems to be not active.

Could you please help again?

Thanks

Marc

0 Ki over 5 years ago in reply to Marc Seiffert

Sorry, I gave the wrong link. Below is the correct one:

C2000 microcontrollers forum