3137 bootloader bl_link.icf file Requested

I do not has the example for Hercules.  I am attaching the link command file and icf file for the blinky project for TM4C123. YOu may be able to creat icf file for Hercules by comparing those two files. The startup file will be different for the IAR tools.

5466.blinky.icf3005.blinky_ccs.cmd

Thanks and regards,

Zhaohong

This is helpful in only showing a very simplistic example.

What the OP requests is the equivalent IAR *.icf of the attached.  

1033.bl_link_cmd.txt

I found the following from a bootloader project.  See if they serve your need.

6518.bl_link.icf  8510.bl_link_ccs.cmd

That is more helpful - but it isn't doing what is needed.

One of the 'tests' is to see if the Fapi functions are relocated to RAM; and then the linker fix up must be done properly:
Here is ONE example:

Fapi_setActiveFlashBank
0x0000241d Code Gb FlashStateMachine.SetActiveBank.obj [3]

Note that is still located in ROM or FLASH.

I would have thought by now that TI has done this with the IAR tools in addition to CCS.

The object modules that need to be relocated are:

F021_API_CortexR4_BE_v3D16.lib: [3]
Async.WithAddress.obj 48
FlashStateMachine.EnableMainSectors.obj 112
FlashStateMachine.InitializeFlashBanks.obj 636
FlashStateMachine.IssueFsmCommand.obj 60
FlashStateMachine.ScaleFclk.obj 32 8 8
FlashStateMachine.SetActiveBank.obj 380 1 1
Program.obj 376
Utilities.CalculateEcc.obj 20
Utilities.CalculateFletcher.obj 54
Utilities.GetNumberOfSectors.obj 16
---------------------------------------------------------------------
Total: 1 734 9 9

There may be a few others that need it - like bl_flash.o as well.

Regards,
John W.