• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 77 subscribers
  • Views 2689 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UART Putty msp430g2xx1_ta_uart9600.c example

Daniel Crowley
Prodigy 40 points
Other Parts Discussed in Thread: MSP430G2231

Hi, 

I'm new to playing around with UART, and MSP430G2231

I'm trying to setup the example UART code (msp430g2xx1_ta_uart9600.c) with Putty as the hyperterminal (With the COM3 selected)

But the program sends the first byte of a string then gets caught in the while loop, ensuring last char got transmitted.

 

Putty doesn't receive anything, and nothing can be inputted. 
I'm not sure whether it's a Putty problem or an MSP problem.

Many thanks, code examples found here (http://www.ti.com/lit/sw/slac463a/slac463a.zip)

Daniel 

**Attention** This is a public forum