TI E2E Community
Tiva™ ARM® Microcontrollers
Tiva™ C Series ARM® Microcontrollers Forum
Adding a JTAG port to a LM4f232h5qd design
I am putting together a design and need to be pointed to where I may find the connections for adding a JTAG port using a XDS100v2 or v3 emulator to my design that will allow me to take advantage of CCS5 and its debugging & flashing capabilities. Meaning I need to know the pin connections from my processor to the 14 or 20 pin header. I have searched but may not be looking in the correct areas.
Any help would be great!
I believe this should be helpful
Maybe I did not clearly state what I was trying to do. I purchased a XDS100v2 with the 14 pin connector and I am designing a PCB with the LM4F part on it and I want to make sure I have the pins correctly connected. Here is what I have on paper:
14pin connector LM4F pin Name
1 Pin 117 PC1/TMS
2 Pin 90 /TargetReset
3 Pin 116 PC2/TDI
5 VDD +3.3v
7 Pin 115 PC3/TDO
11 Pin 118 PC0/TCK
I hope that better explains what I am trying to do? Thanks for the responses!
Take a look at the following article as this should provide some clarity on the treatment of the 14-pin connector pins.
You should handle pin 4 (to GND) and pin 9 (connect to TCK as this is the "return" TCK) to the emulator. Some instances I have seen a series resistor added between pin 9 and pin 11 to allow to break that path if necessary.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.