• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 101 subscribers
  • Views 460 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

IPC and MFP stack for OMAP3 and OMAP5

Enric Balletbo i Serra
Intellectual 575 points

I see recently a new development with IPC and MFC stacks :

   https://git.ti.com/ipc/pages/Home

   https://git.ti.com/mfp/pages/Home

   https://git.ti.com/ipc

   https://git.ti.com/mfp

AFAIK, this development does not include support for OMAP3 processors. We've basically two product based on OMAP3 and OMAP5 and our intention is use same IPC and MFP stack for both processors.

Do you think that this will be possible with the software that you provide?

How much effort it's necessary to use this software with OMAP3 ?

Can we test something that already is working in one of these processors ? Which processors are supported ?

Thanks in advance.

  • 0
    TI__Guru**** 161600 points

    Hi Enric, 

    To my knowledge these git.ti.com repositories are used for OMAP5 & Sitara based processors.  I will check again to fully verify this (and update the thread).

    Enric Balletbo i Serra said:
    How much effort it's necessary to use this software with OMAP3 ?

    This would be a lot of effort. Have in mind that OMAP3 & OMAP5 SoCs are quite different.

    Best Regards,

    Yordan