TDC1000-TDC7200EVM: 10K ohm resistor across sensor

sukho suh

Part Number: TDC1000-TDC7200EVM

Hello;

I have clamp-on sensors that I want to use on EVM. On these sensors (1 pair), there a 10 K resistors across the leads as shown below;

I'd like to know what role this resistor plays.

Thank you in advance for your help.

Sukho

over 7 years ago

0 Scott Cummins over 7 years ago

TI__Mastermind 31655 points

Hi Sukho,

Typically a resistor across the transducer leads can be used to provide damping that will reduce the ringing decay time after the the transducer excitation has stopped. Could you share the sensor part number or datasheet?

Thanks,

0 sukho suh over 7 years ago in reply to Scott Cummins

Intellectual 660 points

Thank you. Oh, I see.

Sensors

Sensors forum

TDC1000-TDC7200EVM: 10K ohm resistor across sensor