Part Number: TDA4AEN-Q1
Example explaining the steps of
https://software-dl.ti.com/jacinto7/esd/processor-sdk-rtos-j722s/latest/exports/docs/mcu_plus_sdk_j722s_11_01_00_15/docs/api_guide_j722s/TOOLS_BOOT.html
Part Number: TDA4VM TDA4VL TDA4VH
Support for user-mode host-id for A72/A53 HLOS running user-mode drivers: ==============================================================
Before the SDK 11.2 release, the UDMA resource allocation utilized elevated…
Part Number: AM2432 Other Parts Discussed in Thread: UNIFLASH
The ENETFOTA example demonstrates how Ethernet can be used to transfer a new application image from a host PC to an AM243x/AM64x device that is currently running an older application image…
Part Number: TDA4AEN-Q1
Sporadic hang in RPMessage_ProcessAnnounce API in ipc echo test while running with safeRTOS on SDK 10.1 , it was observed even with ctrlmsgTask keeping at high priority.
Part Number: TDA4AEN-Q1
FLS APP INDAC example is not showing performance numbers on SDK 11.0. How to get performance numbers similar to other jacinto devices ?
Part Number: TDA4AEN-Q1
Requirement:
To Generate EPWM waveform of 30 Hz on EPWM1 instance using register writes and also get an interrupt on each new pulse.
Part Number: LMK5B33216
This covers the math to simulate clock output phase noise noise as a result of voltage supply noise using PSNR and then creating a voltage supply noise mask based on your requirements.
How to use PSNR data and input voltage…
Part Number: TI-CHARGER-GUI Other Parts Discussed in Thread: USB2ANY
The "Failed to Connect" error typically indicates that the USB2ANY firmware needs to be updated. In most cases, re-flashing the USB2ANY firmware to version 2.9.0.3 resolves the issue…
Part Number: AM62L
Hi TI Experts,
I am starting a new project and want to use Sitara AM62x processor family in the design. Can you guide me in selecting the processor and list the relevant collaterals that I can refer during different phases on the…
