Other Parts Discussed in Thread: TCA9617B , TCA9509 , TCA9801 , TCA9800 , TCA9803 , TCA9802 , TCA9511A , TCA4307 FAQ: Logic and Voltage Translation > IxC >> What Connections of I2C Buffers are not Allowed ?
Part Numbers: TCA9517 , TCA9517A , TCA9509…
Part Number: MCU-PLUS-SDK-AM263PX Tool/software: Hi,
When I was debugging the example codes from MCU+SDK for AM263Px, it told me that there was some trouble writing memory block, which is attached below.
CCS Version: 12.7.1. SDK Version: 9.2.0.56…
Part Number: AM623
Tool/software:
Hi Expert,
Our product needs to pass EMC RE test. We referred the thread, https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1384055/am623-lcd_pclk-setting-and-emc-re-issues-for-dpi-interface…
Other Parts Discussed in Thread: TCA9517A , TCA9517 , TCA9511A , TCA4307 FAQ: Logic and Voltage Translation > IxC >> What are the different I2C Buffer Direction Control Mechanisms ?
I2C buffers implement direction control mechanisms to determine which…
Part Number: AM625
Tool/software:
Hi support team.
I'm working now on the product based on the AM62x processor.
When reading the datasheet I spotted some information that can affect my design.
Does the leakage current for the I/O pins really…
Part Number: PUREPATHCONSOLE
Tool/software:
A table with links to all the software needed for audio devices and their EVMs. Find the device(s) of interest in the table and use the links to request access to the software you need.
Product or…
Part Number: AM62A7
Tool/software:
Hello,teams
We would like to confirm which temperature zone the VTM module generates thermal shutdown based on?(Device Temperature)
Best regards,
XUE Fadong
Part Number: TDA4VM-Q1 Other Parts Discussed in Thread: TDA4VM Tool/software:
This is the configuration description and test results of the Ethernet loopback test using TDA4VM
User guide: https://software-dl.ti.com/jacinto7/esd/processor-sdk-rtos…
Part Number: DP83822I
Tool/software:
Yes, Clock in external clock mode shall be available at power ramp. If not available, it is recommended to hold RESET_N low and release it at least 100 us aer external clock is stable.