Part Number: PROCESSOR-SDK-AM62X
Tool/software:
In MCU+ SDK, during Flash Initialization, we read the device id and manufacture id.
Most common failure is " Unable to read Flash ID... "
Let us understand what parameters does the API Flash_norOspiReadID…
Part Number: TDA4VH-Q1 Tool/software: I want to be able to build and test the GPU test-application lightweight-offscreen demo shown here: https://github.com/StaticRocket/lightweight-offscreen
I am currently on SDK 9.2 how can I do this?
[Click here to return to Transceiver Homepage]
Welcome to the IO-Link Transceivers E2E page!
Listed below are a variety of resources to assist with the implementation of IO-Link!
IO-Link Basics:
IO-Link Overview
IO-Link Sensor Transmitter…
Part Number: AM625
Tool/software:
The Keywriter is an application designed primarily for programming the keys and converting the device from HSFS to HSSE.
During the keywriting procedure, one may encounter errors reflected by the non-zero value…
Part Number: SK-AM62A-LP
Tool/software:
Hi experts,
On SK-AM62A-LP EVM, GPIO0_12 is used for OSPI reset signal.
Why does TI not use dedicated OSPI reset pin for the purpose?
What is the TI recommendation for customer?
Best regards…
FAQ: Logic and Voltage Translation > Ground-Level Translators >> Current FAQ
TXG devices (both push-pull and open-drain) cannot support any level of IEC-ESD. However, IEC-ESD can still be achieved by using a protection device like the ESDS30x product…
Other Parts Discussed in Thread: TXG8122-Q1
Open-Drain Architecture
For I2C applications, the allowable distance between systems is primarily limited by total bus capacitance. The I2C specification limits bus capacitance to 400pF for Standard and…
