Part Number: INA240
What Size Resistors should be used with the INA240?
Can a voltage divider be used to drive the reference input of the INA240?
Why does the output of the INA240 seem distorted compared to the measured current?
Part Number: TMCS1126
How do I calculate the Ioc and Voc thresholds?
What is the range of the overcurrent?
Is the overcurrent for both the positive and negative current?
Do you have a tool to calculate the Ioc and what value I need to apply on…
Part Number: TPS3762-Q1 Other Parts Discussed in Thread: TPS37-Q1 , , TPS3842-Q1 , TPS3760-Q1
Hi,
Currently I'm using discrete approach to monitor the battery rail for overvoltage and undervoltage faults and I'd like to understand is there a single…
Other Parts Discussed in Thread: LM74502 , TPS272C45 Below is a list of all collateral pertaining to TI High Side Switch Devices (TPSxHxxx) devices. This includes TPSxHA, HB, HC, HCS devices.
Part Number: TMCS1123
Hi,
I would like to ask for clarification regarding the long-term insulation reliability of TMCS1123.
I have reviewed TI’s document High Frequency TDDB of Reinforced Isolation Dielectric Systems , which shows that, for polyimide…
Part Number: BQ25883
The BQ25883 and other devices in the family have a Soft Start Feature on Vsys output. This can be seen in datasheet fig77 that Vsys has a slow ramps-up. The Soft-Start feature at power up is noted in par 8.3.3.4.
Slow rate of…
Part Number: BQ25171-Q1 Other Parts Discussed in Thread: BQ25172 , BQ25173-Q1 , BQ25173 , , BQ25170
This home page is for common questions in relation to the BQ25171-Q1, BQ25173-Q1, BQ25170, BQ25172, BQ25173
FAQs
-------------------…
Part Number: MCF8329HS-Q1 Other Parts Discussed in Thread: MCF8329A , MCF8329HS
MCF8329HS: Advanced Motor Control IC with Enhanced Performance
The MCF8329HS builds upon the proven MCF8329A platform, delivering enhanced motor control capabilities and…
Part Number: AM2612 Other Parts Discussed in Thread: UNIFLASH
Hi Team,
Customer is programming AM2612 on their own board, but it not works through Uniflash, could you please help to check the log and point out next step? Thanks.
Uniflash log.…