Part Number: INA3221 Other Parts Discussed in Thread: INA219 , INA226 Why is the INA3221 and INA219 presented as high side devices when there common mode rage is -0.3V - 26V.
Part Number: DS280DF810 Other Parts Discussed in Thread: SIGCONARCHITECT
In this example, we use a non-standard data rate - for example 24.33Gbps - and configure register settings to lock to this data rate. Note: Data rate MUST be within the device…
Part Number: INA240 Other Parts Discussed in Thread: INA193 How to understand the bandwidth specification and how it applies in relation to my PWM control signal
From time to time we get questions regarding returning products (EVMs, IDKs) when they are still in warranty period or similar situations.
I am glad to let you know that there is a portal that you can use: Customer return portal
Part Number: DS280DF810 Using DS280DFxxx or DS250DFxxx we can use a simple divide by 2, 4, or 8 of the data rate clock to generate different prbs pattern at different data rates up to 28Gbps. What are the register settings to make this happen?
Part Number: DS250DF410 Other Parts Discussed in Thread: SIGCONARCHITECT Using a simple clock, DS250DFxxx and DS280DFxxx can generate different prbs patterns at different data rate up to 28Gbps. To make it very simple, SigconArchitect can be used to achieve…
Other Parts Discussed in Thread: TPS65381-Q1 , TPS65381A-Q1 Kindly reply to my TPS65381-Q1: Debug Mode question And I have another query. ERROR_PIN_FAIL is always set even though ERROR/WDI pin is always high (MCU ESM Module detects no failure) and I am…
Part Number: INA199 Other Parts Discussed in Thread: TIDA-00302 , INA168 I really would like to use a particular current shunt monitor in my system; however, the input voltage ratings are a little lower than what is required.Fortunately there is a little…
Part Number: INA250 I want to add transient voltage spike protection to my current sense amplifier circuit and considering adding TVS protection diodes. Is there any considerations I need to take into account.
