Part Number: TPS65988EVM Other Parts Discussed in Thread: TPS65988 , TPS65987 My customer is testing our TPS65988EVM, wants to use one USB-C out to deliver eDP1.4 at 4 lane source capability (don't need USB3.0 SS data on that link). Can we provide a firmware…
Other Parts Discussed in Thread: BQSTUDIO BAT_SHUNT_04-0134_A-vis.pdf
Hi, I've attached the datasheet for our product battery shunt resistor. We use 2 in parallel for effective 0005 value @ 6W, our current from K-2 Energy LFP26650P can be > 80A.
We…
Other Parts Discussed in Thread: CC3100MODBOOST , CC3200MOD , CC3100MOD Hi,
Please help me with this questions below:
Dimensions of:
CC3100MODBOOST
CC3200MODLAUNCHXL
Flash Memory of the CC3100MOD/CC3200MOD – what is the minimal size…
Hi,
I wanted to share some test code that I did for myself, maybe someone else can find it interesting as well.
It is based on StarterWare v2.00.00.07 and was tested via JTAG emulator and run directly in DDR.
There is a ReadMe.txt in the attached…
Hi,
That shouldn't be the case. This hardware mod has been tried on our j784s4 EVMs and we are able to see the logs.
Can you confirm these are the only hardware modifications you made?
Regards, Tanmay
Hi Shun, If you are referring to the analog input/output via AUX connectors, they are only routed to McASP2 on the EVM. To use a different McASP, you'll need to use the Audio Expansion Connector, which can be used directly for digital input/output, but…
Hi Prahaladh,
Please see this EVM for a recommended AMC circuit: https://www.ti.com/tool/AMC-MOD-50A-EVM
The shunt resistance can be increase from 1mOhm to better accommodate 30A.
Unfortunately our products do not have an EN/SHUTDOWN pin, the only…
Hi Mir,
So you are saying the USB Mod board that came with the EVM is obsolete. Can I buy the AC-MODEVM by itself and will it work with my TLV320AIC3007EVM board ?
Thank you,
Mark
Hi Harshitha, Seems like this is a Single-Link LVDS panel (4 differential data pairs + 1 differential clock pair)? If that's the case, this will not work directly with SK-AM62P-LP EVM, since the OLDI output there is Dual-Link (8 differential data pairs…
Hi Tanmay,
Thank you for confirming that the EVM hardware modification is required for LPM validation, and for pointing to the SDK documentation.
Our board
Board: J784S4 EVM, PROC141E5 (GP silicon)
Current stock configuration (per schematic…
