Other Parts Discussed in Thread: ADC16DV160 I'm trying to understand the ADC latency on the ADC16DV160, and have a few questions.
We're using them in a system where we have multiple ADC16DV160 chips on the board, all synchronized to the same clock.…
Other Parts Discussed in Thread: ADC16DV160HFEB I am looking for an eval. system for the asad16dv160 to use in an ultrasound system where I need to sample frequencies in the range 1MHz - 50 MHz. I purchased the combo. eval. boards recommended (ADC16DV160HFEB…
Ryan,
There are two specifications for the Temperature, Storage Temp = 150C and MAX Junction Temp also = 150C. This is the ABSMAX operationally.
Since this device has a thermal pad, the ThetaJC is from junction to the thermal pad, as the heat is dissipated…
Other Parts Discussed in Thread: ADC16DV160 Hello.
ADC16DV160 has maximum Conversion Rate and Input Clock Frequency (F CLK ) of 160 Msps/MHz. In case when clock divider (/2) is enabled, does the F CLK maximum become 320 MHz, thus maintaining maximum…
Other Parts Discussed in Thread: ADC16DV160 We're looking at using the sleep mode on the ADC16DV160 to try and conserve power, but it is difficult for us to quickly disable the input clock to the ADC.
1- Does the ADC16DV160 require us to stop the clock…
Other Parts Discussed in Thread: ADC16DV160 , LMH6521 , LMH6517 We’re looking at the ADC16DV160 input interface and have a few questions. An ideal setup for us would be to use a relatively low power, high linearity ADC driver with the ADC16DV160 ADC.…
Need some verification, the datasheet is no quite clear.
According to the datasheet, the Dataout to Outclk setup and hold has a guaranteed minimum of 1 ns when operating at 160 MHz. The datasheet also notes that "This parameter is a function of the…
Part Number: LMX2594 Other Parts Discussed in Thread: ADC16DV160 Tool/software: Hi Team,
We are planning to use ADC16DV160 analog to digital converter in our design, We need to source sampling clock from fractional PLL LMX2594 as per our requirements…
Hello,
I believe this may be a duplicate post - please refer here:
https://e2e.ti.com/support/data-converters-group/data-converters/f/data-converters-forum/1269030/adc16dv160-adc-and-dac-selection-for-4-20ma-analog-input-and-outputs
Regards, Am…
Hi Shivakant,
We have several options that will meet all of your requirements, except for decimation. Some examples are: ADS42LB69, ADC16DV160 and ADS5484.
Best Regards,
Dan
