Hello Haim,
There is a +/- 10 degree offset that varies part to part in the AFE8030 temp sensors. Therefore, please use this accuracy information accordingly. Thank you!
-Kang
Part Number: AFE8030 We measured the delay between the 8 Tx channels in the oscilloscope and saw different delay between the channels every reset.
We tested it while injecting pulse signal.
It looks like there is some kind of ~ 100nsec between the channels…
Part Number: AFE8030EVM Other Parts Discussed in Thread: AFE8030 , LMK04828
Hi Team,
We have 6 EVMs and all of them have been modified for SPI access via FMC. Following changes have been made:
The resistors connecting FMC pins to SPI signals have been…
Part Number: AFE8030EVM Other Parts Discussed in Thread: AFE8030 Hi Team,
As we are Testing the data path latency from FPGA to TI we have seen very high latency of ~740ns.The test procedure as follows
So we are Triggering the Signal from the Intel board…
Hi
I do actually have a part number: Please can you provide the CE/EU Declaration of Conformity for PN: AFE8030-3P5EVM?
This part was recently added to our Mouser USA portfolio. T.I website does not seem recognised the part.. I could not find the CE/EU…
Hello
1. LNA is low noise amplifier. Typically in the RF receiver line-up, you will connect an external LNA to the RX input to increase the gain and lower the noise figure. The AFE8030 does not have the LNA.
2. The AFE8030 have internal gain stage for…
Hi will,
yes with the same setup and different AFE8030 evk .one evk is having CRYSTEK CVHD-950(2135-01) which is working but other evk is having CRYSTEK CVHD-950X(2227-02) which is not working(seeing the output of LMK as 247.63Mhz).
Regards
P Shiva
