Part Number: AM1806 Other Parts Discussed in Thread: OMAP-L138 , , AM1808 Hi
I have a question about the tool “TI Serial Flasher Host Program for OMAP-L138”.
I would like to program NOR FLASH with AM1806.
To do it, I set the following parameters as:
…
Part Number: AM1806 Hello
My customer is using the AM1806. However, the AM1806 is being damaged during the manufacture of the customer's board, which has recently applied the AM1806. More specifically, I received a report on TI bad analysis that told…
Part Number: AM1806 Hi
There is the description about clearance for signals on chapter3 (page10) in http://www.ti.com/lit/an/spraar7h/spraar7h.pdf .
I'd like to know about clearance for GND pattern also.
Best regards,
HaTa.
Part Number: AM1806 Hi
Could you please advice the way to improve the throughput for Read to NOR FLASH by using EMA_CS2.
NOR FLASH is S29GL256S.
The setting of EMA_CS2, EMIFA.CE2CFG=0x00720301.
EMIFA clock, PLL0 SYSCLK3=72Mhz.
I use the following code…
Part Number: AM1806 Other Parts Discussed in Thread: OMAP-L132 , UNIFLASH , AM1808 , OMAPL138
Could you share the concrete methods, which means how to write to a blank e. MMC devices by way of AM1806?
We think it is able to write though AM1806 from below…
Part Number: AM1806 Other Parts Discussed in Thread: AM1808 , Hi,
I found that the Page size configuration register (PCMR register) in our released driver " AM1808_StarterWare_1_00_03_03\drivers\emifa.c".
However, there is no description about…
Part Number: AM1806 Hi
How is the deference between EMA_WAIT[0] and EMA_WAIT[1]?
For example, when 1 NOR FLASH is connected to EMA, how to connect the ready signal of NOR FLASH and EMA_WAIT[0] and EMA_WAIT[1]?
Best regards,
HaTa.
Part Number: AM1806 Hi,
According to the Silicon Errata for AM1806
http://www.tij.co.jp/jp/lit/er/sprz314h/sprz314h.pdf
at chapter “2.1.5 System-Level ESD Immunity Usage Note”, the following design is recommended.
However, load current…