Part Number: AM3505 Hi,
Quick question: Can you drop in a crypto enabled part (AM3505AZCNAC) in place of a non-crypto part (AM3505AZCNA) without any issues? Obviously assuming crypto accelerators are not used in the original design.
Thanks,
/ W…
Part Number: AM3505 Hello Everyone,
So I've been having this problem for a while now and I'm finally coming to the forums for help after pulling my hair out lol. I am using VAR_SOM_AM3505 WINCE6. Everything is working fine for 800x600 resolution. But…
Part Number: AM3505 Hi All
Are there any known cases of the eMMC chip to go into INACTIVE state
We are using AM3505 and eMMC from different vendors, in some units it looks like the eMMC has changed state into INACTIVE mode after have being initialized…
Part Number: AM3505 Hello.
Section 24.4.7.6 of the TRM states that it supports MMC Specification v4.2.
Can you confirm if we can use later versions of this MMC specification with the AM3505?
Thanks.
Part Number: AM3505 Tool/software: Code Composer Studio Hello team,
I have a customer working with the AM35xx device family for a Beagle Bone Board - like - project. The contact is a software engineer inquiring about official code from TI regarding…
Part Number: AM3505
From the 24.2.2.3 of AM35X TRM( http://www.ti.com/lit/ug/sprugr0c/sprugr0c.pdf ) , I saw the ‘ sys_nreswarm’ signal will be triggered by ‘internal reset’.
I'm wondering what does the ‘internal reset’ mean, what are the detail types…
Part Number: AM3505
I wanted to use your design resource to find all recommended PMICs that support the AM3505 Sitara Processor - using the following url:
http://www.ti.com/design-resources/design-tools-simulation/processor-fpga-power/texas-instruments…
Part Number: AM3505
Customer is trying to debug a very intermittent problem on a product that uses the AM3505. They are trying to use the ARM debug features by programmatically configure a watchpoint. They have found where the ARM debug registers are…
Part Number: AM3505 Background . - We are running up an AM3505AZCN on a new prototype pcb. The design is very much the same to a previous design, with minimal changes.
Problem - to boot from UART3 we assert SYSBOOT5 ("Bootmode") to logic 1 then pulse…
Part Number: AM3505 Hi all,
Customer find sometimes the sys_nreswarm of am3505 will get low.
The TRM said internal reset will cause the sys_nreswarm get low.They want to know which source will cause this happen?
Could you please help this? thanks…
