Part Number: AM5748 Tool/software: hi, We are using AM5748 in one of our secured communication project. this requires ethernet data rate of 1Gbps. but we are not able to get 1Gbps. we are able to communicate at 500Mbps upto 700Mbps.
Could you pls let…
Part Number: AM5748 Other Parts Discussed in Thread: AM5728 , Tool/software: Hello Team,
Our current design uses the AM5728 processor, but we're planning to upgrade to the AM5748.
We need a clarification regarding QNX support for the AM5748 processor…
Part Number: AM5748 Other Parts Discussed in Thread: SYSBIOS , DP83869HM Tool/software: Hi,
We are using custom board with AM5748 running on Sysbios (SDK version: 08_01_00_09). AM5748 EMAC is configured in switch mode.
Two DP83869HM ethernet Phy's…
Part Number: AM5748 Other Parts Discussed in Thread: AM5718 Tool/software: Hi experts!!
We are working with Sitara AM5748 and have seen that when we interact with the display of the device, the GPU impacts the performance of DSP1 which receives samples…
Part Number: AM5748 Tool/software: As title said, when connect AM5748 with CS8427 with I2S port, there is connection error. But when add a resistor in the Bclk and LRclk then the connection is OK.
Could please help to check this is OK and why?
Part Number: AM5748
Tool/software:
Hi ,
We are using AM5748 as RC and FPGA as EP , We need to send data from FPGA to AM5748 for that we need to setup inbound configuration settings in AM5748 , but we don't have inbound settings in drivers/pci…
Part Number: AM5748 Tool/software: Hello Sir,
My name is Venkateswara Reddy, working Lekha wireless solution Bangalore
I am using AM5748 two ARM15 cores in SMP mode. Also using DSP1.
I have implemented IPC between ARM15 and DSP1, attach is success…
Part Number: AM5748
Tool/software:
Hi Everyone,
We are using IEEE 1588 PTP to sync with the grand master, this is working fine when we are using it without a bridge. In AM5748 we have two Ethernet interfaces eth0 and eth1, we have bridged these…
Part Number: AM5748 Tool/software: Hello,
I am currently working with the SYS/BIOS example project (EMAC_BasicExample_idkAM574x_armBiosExampleProject) to enable Ethernet functionality. However, the Ethernet driver is not receiving any packets when multiple…
Part Number: AM5748 Tool/software: Is it allowed to set the pinmux in the kernel device tree in the 6.1 kernel?
Back in the SDK 06 days, we were told that all pinmuxing had to be done while in io isolation (i.e. in spl), this is covered in sprac44a…