Part Number: AM6548 Tool/software: Why is that WKUP_UART on the AM6548 has its input clock configured to 96 MHz ? Is this due to a sysfw issue?
We are having the same issue and resolution as this thread: https://e2e.ti.com/support/processors-group/processors…
Hi Nikhil,
May I ask:
1. Was there was an error message for the " platform_get_drvdata() function gives probe error for iep0" probe error?
2. Are you testing this on a custom board or an AM65x IDK?
3. What are the specific steps you took to migrate…
Willson, it is most likely a signal integrity issue. You should try to narrow down the issue with deterministic memory tests. This will help determine if the issue is on a certain bit or byte which may require different IO settings. Did you perform any…
Part Number: AM6548 Tool/software: Hi,
I've added WKUP UART0 to the device tree in Linux, and set the baud rate to 9600 in Linux using stty -F /ttySn. When I use the third COM port to interact with the serial port, I need to set it at twice the baud…
Part Number: AM6548 Tool/software: I would like to copy over a default image of Linux from an SD card into the eMMC. I currently have copied U-Boot over by following this tutorial:
https://git.ti.com/cgit/processor-sdk/processor-sdk-u-boot/tree/board…
Interesting, I may have missed something, the example seems to be loading now with the following linker configuration: /*----------------------------------------------------------------------------*/
/* r5f_linker_freertos.lds …
Part Number: AM6548 Tool/software: Hi
I've been looking for alternative ways to boot U-Boot for a custom design we have created. Is it possible to boot U-Boot on to the system via ethernet? I've taken a look at the Linux SDK documentation and it does…
Hi,
From what I am able to research quickly this is a higher level protocol flag used by DHCP servers. I am not able to find exact examples but the ones I am seeing can be summarized as the IP address received from the DHCP server is tentative or not confirmed…
Part Number: AM6548 Hi TI,
Is OpenAMP supported between R5 and A53 on AM6548. Is there any example on how it can used to communicate between R5 and A53 using OpenAMP.
Regards,
Sarfaraz