Part Number: BOOSTXL-CANFD-LIN Other Parts Discussed in Thread: TCAN4550-Q1 , LAUNCHXL-F28379D , EK-TM4C1294XL , TPS7B7702-Q1 I followed the instructions in "Connecting the TCAN4550-Q1 to the MSP430 - CAN/LIN booster pack" ( https://www.youtube.com…
Part Number: BOOSTXL-CANFD-LIN Hi, I'm looking for the design files for the BOOSTXL-CANFD-LIN, mainly I'm after a 3D model as I'm designing an enclosure for some field testing before i move to a production design
Hi Peter,
Correct, and this crystal is used on the TCAN4550EVM and the BOOSTXL-CANFD-LIN with 8.2pF load capacitors. However, the PCB parasitic capacitance is different for all board designs, and these boards are not normally operated at high temperature…
Other Parts Discussed in Thread: LAUNCHXL2-TMS57012 , BOOSTXL-CANFD-LIN , TCAN4550 Hi Team,
Our customer designed a custom carrier board with CAN interface. He would like to know if we have a device that can be used to test the speed of their CAN FD. Can they…
Hi Eric,
I would recommend using the BOOSTXL-CANFD-LIN BoosterPack along with the MSP-EXP430FR6989 LaunchPad Development Kit. Demo firmware has been developed for these boards that can be used for your testing purpose. By default the code configures the…
Hi Vishnuvardhan,
If you want to use the MSP430F5529, you can pair with something like https://www.ti.com/tool/BOOSTXL-CANFD-LIN , which is a CAN or CAN-FD Controller and Transceiver which you can use with a SPI interface.
The MSPM0G350x family ( https:…
Hi Abhijeet,
I don't understand the STATUS (0x000C) value and this does not look correct. It appears that bit 27 is getting set but bit 2 is not. Bit 2 (Internal_error_interrupt) is the Logical OR of bits 31:24. Therefore if bit 27 is set, bit 2 should…
Part Number: TMS320F2800137 Other Parts Discussed in Thread: LAUNCHXL-F2800137 , BOOSTXL-DRV8323RS Hi all,
I have custom hardware on which i try to run the motorcontrol lab using a two current shunt configuration.
All ADC's inputs and calculations have…