Part Number: DP83822I We are using DP83822 (single port 10/100 Mbps Ethernet PHY Transceiver) connected to SOC(zynq 7020) in one of our designs , The electrical interface (RJ-45) is tested and is working fine.We have made necessary Hardware modifications…
Part Number: AM3352
Hello,
On my board, I am using TI-PHY- DP83867, it is working ok with SDK-05.00.00.15., but when I tried to migrate to SDK-6.01.00.08, ethernet is not working.
I am attaching my log files for both SDK for your reference,
Thanks…
I'm using a DM8168 with EZSDK 5.04.00.011 and I can't get the video_copy example to run. The version of Codec Engine is 3.22.01.06.
# insmod cmemk.ko phys_start=0xa0000000 phys_end=0xa07fffff pools=20x4096,10x131072,2x1048576
CMEMK module: built on…
Hello Craig,
Thanks for the additional information. The problem here is going to be the input bias current. The INA121's Ib is specified at 50pA (max). If the sensor has an impedance of 100Mohms you could have as much as 5mV of error on your 59uV signal…
Hi Jack,
Thanks for reaching out to us.
From the fundamental harmonic analysis, effective resonant capacitance is C5+C6 (parallel combination of C5 and C6. Here resonant inductor current is split between these capacitors).
Splitting these resonant…
Hi Sundar,
Please see the following attachments.
dlpa084.pdf
DLPU057_Piccolo_SPI_Command_Guide_March2018.pdf
DLP3030-Q1_full_datasheet_dlps076a.pdf
3681.dlpu055_DLPC120-Q1_I2C_User_Interface_Programmers_Guide_201803.pdf
I also believe I have…
Other Parts Discussed in Thread: DRA752 Hello All,
I'm using DRA752 EVM with one display. The kernel I'm using is `3.8.13`. In kernel source tree(drivers/video/omap2/displays/panel-lg101.c) I modified the resolution as .x_res = 1280, .y_res = 720, based…
Other Parts Discussed in Thread: TVP7002 Hi,
I am using EZSDK 5.02.02.60 on board DM8168.
I am using C6RUN(00.98.00.00) with OpenMax(05.02.00.15) .
My program will down after worked 1min~4 hours , with the error like below.
Assertion at Line…
Use 2GB DDR on 4AJ.2.5P2 source Hi Everyone. We use 2GB DDR devices for our OMAP4470 CPU, and use OMAP4AJ.2.5P2 version system. kernel version:/kernel/android-3.4 android version:android4.2 I changed some software source like below: in xloader: /cpu/omap4…
