Part Number: PROCESSOR-SDK-AM65X Tool/software: Linux Dear TI team,
we're getting kernel panics from the icssg_prueth kernel driver whenever we have more than one PRU ethernet interface with an active link (attached to the same switch).
I've attached…
Part Number: 66AK2E05
Tool/software: Linux
Hi all,
I want to achieve a precised (in us range) time synchronisation between two 66AK2E05 SOCs connected via 1 Ethernet cable and running under Linux on ARM side . The Goal is to be able for example…
Part Number: LAUNCHXL-F28069M Other Parts Discussed in Thread: CONTROLSUITE Dear TI engineers,
I have read a paper named "A Novel Vector Control Strategy For Bipolar Stepper Motor"
(see the attachment here: 8625.A-Novel-Vector-Control-Strategy-For…
Hi,
Firstly, Thank for your reply,
I have tried to place program in Flash and I have tried to executing my code from flash after a DSP Reset.(I followed TI documents in Addition.) But I couldnt solve problem.
Could You share a tutorial or another…
FRK,
This document refers to an interface to an Altera device but most of it is still applicable to a Xilinx FPGA.
Regards,
Jim
4213.Interfacing to FPGA's app note.pdf
Other Parts Discussed in Thread: WL1835MOD , TPS65217 We used to use am335x SDK 7.0 for our am335x custom board with WL1835MOD chip. It worked well. Recently, we have decided to move to latest SDK 2.0.0.
We have three issues.
1. "no symbol version…
slaz290ab.pdf
Hi Ashwin,
Here is SLAZ290AB. For future reference at the bottom of the document we have revision history, so you can see that the changes from AB -> AC were formatting.
Regards,
Luke
Hi Ki, I have tried reinstalling the software in a different path; however, the issue still persists.
Please find the attached debug server log for your reference.
Server_dump_log.txt
Margarita ,
I have followed the steps that you have mentioned. I have created the SD card image succesfully but when i run the Capture command in target board after the boot, it seems that there is no capture done and it is in the OMX_StateExecuting…
Hi Todd,
Apologies. I thought I had added the link; somehow it didn't show up on here.
Here's the tutorial link:
TI_RTOS_Kernel_Workshop_Lab_Manual_rev4.00.pdf
I have also attached the lab manual of the tutorial. I am not sure if that helps…
