Dear Wang Jin -
please see www.ti.com/.../discovery-adapt and the download link for the code reference for the STM devices here www.ti.com/.../discovery-adapt
Laurence
The HDMI cable adapter contains the logic circuit to implement the PD communication and supports the HDMI Discovery Process.
But even if a PD controller supports HDMI, it will be in the source and the cable adapter, not on the HDMI sink side…
Hi Pawel, SFlash is mandatory for function of CC3120 or CC3100 device. At least you should have uploaded ServicePack inside flash. CC3120 have own fimrware in ROM and ServicePack contains patches for this fw. Content of sFlash can be uploaded by Uniflash…
Sid -
have you considered to leverage the board we made available for such non-TI MCUs, for the BoosterPack interface?
www.ti.com/.../discovery-adapt
in case you have some breadboard issues, maybe this would be useful/stable platform for you.
Part Number: BOOSTXL-CC3135 Other Parts Discussed in Thread: CC3135
As per the Programmers guide we do step by step, Now We have changed the user.h with respect to the STM32 controller and changed the OS abstraction layer to Freertos function calls.…
Hi Marie, sure can do.
In ti_build_config.opt I have changed the BLE Host Build Configuration to -DHOST_CONFIG=PERIPHERAL_CFG+CENTRAL_CFG
In project_zero.c I have added the following:
Changed GAP_DeviceInit to GAP_DeviceInit(GAP_PROFILE_PERIPHERAL…
Part Number: CC2564 The platform used is STM32F407VGT6 discovery+CC256XEM-STADAPT-V1.0+ CC2564MODNEM _v1.0。The problem with demo being used by CC256XSTBTBLESW-v4.0.2.2-Setup in SPPDemo is that the initialization is successful。
the problem:
In order to work…
Thanks for looking over the schematic Eric. I appreciate it! Nice to know I might not be too far off in how this should work.
If I remove the J8 jumper, then the RealTek chip never shows up on the iPad. The charging seems to work well. The iPad just seems…
Hi Erdem,
Yes, simple_central is able to scan for non-connectable advertisements. You will want to set DEFAULT_DEV_DISC_BY_SVC_UUID to FALSE so the scan results are not filtered by UUID.
The scan results are stored in gapDevRec_t devList[]. Once the…
Part Number: CC2564MODAEM
Hello,
I have CC2564MODAEN + CC2564XEM-STADAPT + STM32F407G-DISC1.
I made below changes on each board to make it compatible with nonOS HFP example which is given for EVAL board of ST.
Hardware changes
1. Changes in STM32F40…