Part Number: DS125DF410 Dear Sir/Ma'am,
I have downloaded SNLC055 and installed , now in my design i am using DS125DF410 retimer , to update this IC on sigCOn architect we further require retimer profile updater ( which is SNLC057 zip folder ) for DS125DF410…
Part Number: DS125DF410 Tool/software: Dear Sir/ Ma'am,
We are using the above mention part (DS125DF410) in our design. In order to perform SI analysis, IBIS-AMI model is required. Kindly provide the same. Same at the Earliest.
Part Number: DS125DF410 Tool/software: Dear Support Team,
Our current product consists of a transceiver device, a receiver device, and the cable that connects them. We are using the DS125DF410 in our receiver device.
The DS125DF410 is used in Manual…
Part Number: DS125DF410 Tool/software: The DS125DF410 can measure HEO and VEO by reading the values of registers 0x27 and 0x28. Additionally, by using the software SigCon Architect, the status of Eye Opening can be graphically confirmed from the Eye Monitor…
Part Number: DS125DF410 Other Parts Discussed in Thread: DPS-DONGLE-EVM , USB2ANY Tool/software:
In our design we are using 14 retimers DS125DF410 , we are planning to use 5 retimers in each daisy chaining mechanism(5-5-4), for this architecture 1EEPROM…
Part Number: DS125DF410 Other Parts Discussed in Thread: USB2ANY
Tool/software:
[Background]
We would like to use the Eye Opening Monitor of DS125DF410SQE to evaluate
the signal quality within our system. We understand that a USB2ANY fixture is…
Part Number: DS110DF111 Other Parts Discussed in Thread: DS125DF410 , I'm tring to find a retimer for the following usage scenario: PCB - BACKPLANE- PCB with end to end -25dB IL, 10Gbps datarate. Is DS110DF111 enough for this application or DS125DF410…
Part Number: DS125DF410 Tool/software: To correct video signals after long-distance transmission via cables, I am considering using the DS125DF410 on the receiver board.
The DS125DF410 implements two methods for signal correction: Manual CTLE and Adaptive…
Part Number: DS125DF410 Tool/software: I would like to debug the CTLE settings using the Eye Monitor function of the DS125DF410.
Is the following procedure correct for setting all channels' CTLE to Manual mode and modifying the CTLE Gain settings? …
Part Number: DS125DF410 Other Parts Discussed in Thread: SIGCONARCHITECT , DS110DF111 , DS125DF111 , DS250DF410 Tool/software: Currently using a DS125DF410 in an application doing operational temperature range testing. When we test from +26C to 50C we…
