Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: DS90LV019 Tool/software: Hi,
If only the receiver function of the DS90LV019TMTC is used, should the pins related to the transmission side be fixed to GND so that they do not become undefined? I think that pins 1, 2, 11, and 12 are the relevant…
Part Number: DS90LV019 Hello,
My customer has unexpected outputs from D+/- as shown below. They expect LVDS signals, but these aren't.
Their current schematic is shown below. There 2 PCBs where PCB1 has FPGA and PCB2 does DS90LV019. These PCBs are…
Part Number: DS90LV019
Hi,
I have a RF Driver to be driven through an FPGA
Below are RF Driver parameters
Can i use DS90LV019 with output temination impdeance as 330 Ohm
If not kindly suggest a LVDS to TTL converter for above kind of inputs.
Let me know…
Part Number: DS90LV019 Hi, I would like to know the max allowable junction temperature and the various thermal resistance values (Junction-case, junction-board and junction-ambient) for DS90LV019TMTC/NOPB. Thank you. Best, Prathik
Part Number: DS90LV019 Other Parts Discussed in Thread: DS90C401 Good morning,
Hello, Can I get a TI IC for converting 5 volt TTL to LVDS_33 keeping in mind that, I want use that IC for making a LLC which will interface the FPGA with a Avalanche photo…
Part Number: DS90LV019 We are designing with the DS90LV019 LVDS Driver/Receiver.
We will be using the Driver section but have no need for the Receiver section.
So we will disable the Receiver section by connecting the RE(not) input to VCC.
In this case…
Part Number: DS90LV047A Other Parts Discussed in Thread: DS90LV019
Tool/software:
Hey TI Experts,
We have an application where we need to communicate between two boards upto 5 metres apart or in some cases upto 10m.
Therefore, as SPI suffers from signal…
