Part Number: EVM430-FR6043 Dear TI,
Please provide your assist to enable 5V LDO on board EVM430-FR6043 to excite ultrasonic transducers at 5V.
I have done,
1. JP1 ON
2. JP2 switched to |5VTx|
But still unable to get 5V at JP4 which is VCC_TX.
There may…
Part Number: EVM430-FR6043 Dear Sir,
Good morning!
Please help me out to enable onboard LDO 3.3-5V in EVM-6043.
https://ticsc.service-now.com/csm?sys_id=6e8d555e470f0d90d4f52e61e36d4336&id=csm_ticket&table=sn_customerservice_case
Part Number: EVM430-FR6043 Other Parts Discussed in Thread: TEST Dear TI,
Good morning!
Please help me to find out the solution of below problems.
1) "DToF -shift was greater than maximum sample shift"
This above error is displaying again and…
Part Number: EVM430-FR6043 Dear TI,
Good morning!
Please help me to find out the solution of below problems.
1) "DToF -shift was greater than maximum sample shift"
This above error is displaying again and again. Please help me to overcome…
Part Number: EVM430-FR6043 hi,
I used EVM430-FR6043 for water flow project facing some issue cannot calibrate the value.
2. I used the USS Software and follow demo code
3. Use the following setting to calibrate the evk board, then it shows error can…
Part Number: EVM430-FR6043
Good morning!
I have purchased an EVM430-FR6043 to use for flow rate and oxygen concentration measurement along with two 200kHz Jiakang transducers. While the provided GUI is good for flow rate, I would like to be able to read…
Part Number: EVM430-FR6043 Other Parts Discussed in Thread: MSP430F5528 , CAPTIVATE-PGMR My development board cannot work normally after replacing MSP430F5528 due to malfunction. Do I need to update the firmware of MSP430F5528? Where can I get this firmware…
Part Number: EVM430-FR6043 Other Parts Discussed in Thread: MSP430F5528 , TEST , UNIFLASH Hello,
I'm working on the " Optimized Ultrasonic Sensing Metrology Water Flow Measurement Reference Design" project on EVM430-FR6043. I built and ran …
Part Number: EVM430-FR6043 Other Parts Discussed in Thread: TIDM-02005 , MSP430FR6043 Greetings,
we opted for this board instead of the 6047 due to the on-board amplification possibility. Therefore, I don't want to cancel the AFE as suggested by TIDM-02005…
Part Number: EVM430-FR6043 Other Parts Discussed in Thread: TEST Hi
We are trying to figure out how to build a flow meter around the TI microcontroller and USS library.
The settings we are using are as on the screenshots 1 and 2 below.
The ADC capture…