Part Number: LM10011 Other Parts Discussed in Thread: TPS544C25 , I am using a TPS544C25 regulator with LM10011 dac providing adjustable output voltage as required by our processor. I have designed the TPS544C25 using webench and compensation components…
Part Number: LM10011 Other Parts Discussed in Thread: TMS320C6655 , TPS54527
Hi,
I am looking for information regarding the LM10011 Analog controller to connect between the core voltage of DSP TMS320C6655 to TPS54527 DC/DC.
Can I use this DC/DC with the…
Part Number: TMS320C6672 Other Parts Discussed in Thread: LM10011 Hi Team,
My customer is exploring modifying the power design portion for TI CC6672. They are keen on using LM10011/0 solution for the SRV interface as it looks more compact compare to UDC9222…
Part Number: LM10011 Other Parts Discussed in Thread: TMS320C6655 I am using LM10011 to control the CVDD voltage of TMS320C6655.
Does LM10011 work with both Voltage and Current Mode Buck Controllers?
Part Number: TMS320C6655 Other Parts Discussed in Thread: LM10011 , Hello,
I would like to know if using the TI LM10011 Programmable Current DAC connected to the CORE CVDD voltage source of DSP TMS320C6655 according to the Smart-Reflex technology (See the…
Dear Katlynne,
We are using LM10011 to vary other regulators' outputs as well. Below are the regulator outputs and varied voltage range.
1.8V nominal : 1.54V to 2.08V
1.1V nominal : 0.94V to 1.27V. We will be using 6 bit mode. So can we use LM10011…
Part Number: LM10011 Other Parts Discussed in Thread: TPS51215A Hi Team,
My customer is using TPS51215A .
In TPS51215A's datasheet, it says it supports 2-bit VID output voltage control from 0.5-V to 2.0-V and 0-V VOUT. But I see TI's VID controller LM10011…
OK starting from the beginning. LM10011 can only source current so it will margin the voltage up. Seeting the output to the minimum of 9.6 V:
Radj (kohm) = 5.11 * ((100/20)-2) = 15.33 k
And the internal voltage at the non-inverting error amp input is…