Part Number: LM95241 Tool/software: Hi,
I am calculating Pullup resistance based on this article but the values don't align well. Can you please check and confirm what I am missing out?
Rpmin = (Vcc-VoL)/IoL = 2.5-0.8/(10uA) = 170kohms
Rpmax = tr…
Part Number: LM95241 Tool/software: HI ,
In LM95241 , for SMBDAT Pin what will be the VOH Voltage pin ? On FPGA side it is connected to 2.5V Bank. VIL= 0.7V (Max) and VIH= 1.7V to 2.8V. (FPGA)
I am attaching the another discussion link below. Kindly…
Part Number: LM95241 Tool/software: Hi,
I am supplying LM95241 with 3.3V input.
In that case, can SMBCLK/DAT pins be pulled with a different 2.5V supply?
Will there be any impact of doing so?
Thanks
Part Number: LM95241 Other Parts Discussed in Thread: ADC12DL2500 , TMP461 Tool/software: Hi,
I am interfacing LM95241's 1st channel with Virtex ultrascale+ FPGA and 2nd channel to ADC12DL2500 TDIODE pins.
Can you please share which parameters to…
Other Parts Discussed in Thread: LM95241 Dear Sir
Below SPEC is from SMBUS SPEC
But LM95241's datasheet show VIN(0)Max + 0.15V ,
Is it correct?? or VIN(0)Max - 0.15V is correct
Other Parts Discussed in Thread: LM95241 Hi Sir,
We have some fail return from product line. Our appliction is cable, the Vdd is from other PCBA board. These fail IC, Vdd and Gnd is short, Is the issue ESD or over votagle? Our Vdd don't have add any…
Part Number: ADC12DL2500 Other Parts Discussed in Thread: LM95241 Tool/software: Hi,
We have a legacy system where we are replacing ADC to ADC12DL2500.
Can we continue to use LM95241 for ADC temperature sensing?
Thanks
Nandini
Part Number: ISO6720 Other Parts Discussed in Thread: ADC12D1800 , LM95241 Tool/software: Hi,
In our legacy system we are replacing ADC12D1800 with ADC12DL2500ACF.
Can I continue to use LM95241CIMM-1/NOPB sensor with ADC ADC12DL2500ACF?
Can you…
Part Number: ADC12DL1500 Other Parts Discussed in Thread: ADC12D1800 , LMH6554 , LM95241 , ADC12DL3200EVM , ADC12DL3200 , ADC12DL2500 Tool/software: Hi,
1) I want to migrate my design which is currently using ADC12D1800 to new part ADC12DL1500. Is there…
