Part Number: LMK5B33216 Other Parts Discussed in Thread: ADC3664 Dear Team,
We need some help in some understanding LMK5B33216 being used in a custom solution for a client with ADC3664. Input is intended to be 120MHz and output on all 16 channels to…
Part Number: LMK5B33216 Hi TI Team,
We are currently evaluating the LMK5B33216 for a new project. To optimize our mass production line and SMT process efficiency, we would like to pre-program the configuration profile (generated from TICS Pro) into…
Part Number: LMK5B33216 Looking at the data sheet and programmers guide I am looking for registers or ways to verify the output frequencies are correct without having to manually meaure via physical pin measurements. Are there registers that will give…
Part Number: LMK5B33216 We need TI’s help on the clock generator which includes JESD204B clocking. We tried the TICS Pro and the Clock Tree Architect. We can’t come up with a solution with the TICS PRO with the proposed devices from the Clock Tree Architect…
Part Number: LMK5B33216 Hi Respected
Kindly provide tape width , tape pitch and pin 1 orientation quadrant (upper left or right / bottom left or right)
LMK5B33216RGCR
LMK5B33216RGCT
Part Number: LMK5B33216 Hi, There is an issue we are encountering with LMK5B33216 where the customer is trying to use only DPLL3 in the design to generate 12 outputs and not getting the lock to the REF0, according to them the DPPL is getting locked but…
Part Number: LMK5B33216 Tool/software: Hi Team,
The customer is asking for a reference design for the LMK5B33216 design with the FPGA PTP function of ethernet IP!
Is there any reference design about it to share with customer?
Thanks.
Part Number: LMK5B33216 Other Parts Discussed in Thread: LMK5B33414 Tool/software: Hello,
I am trying to design the following:
Inputs:
RefIN0 = "dirty" 1-PPS from GPS receiver
RefIN1 = nothing
OCXO = 100MHz disciplined OCXO
Outputs that…
Part Number: LMK5B33216 Tool/software: I am currently using I2C to communicate with the LMK5B33216 and have observed the following behavior:
When GPIO0 = 1 and GPIO2 = 1, I2C communication works properly and the signals are stable.
When GPIO0…
Part Number: USB2ANY Other Parts Discussed in Thread: LMK5B33216EVM ,
Tool/software:
I recently just received the LMK5B33216EVM for our testing. I followed the recommended quick start instructions, where I have all the jumpers in their default configuration…
