Part Number: LP-MSPM0G3507 Tool/software: The code control pin outputs a high level. There is voltage on the pa10 pin chip, but the pa10 pin led out from the development board has no voltage. The other pins can light up. Could you please check what the…
smit italiya said: 1) So why this happens?
It seems you have already divided app and boot into two different sectors.
Not sure what happened.
smit italiya said: 2) As per reference manual Flash size is 128kb then why in boot application example…
Part Number: LP-MSPM0G3507 Other Parts Discussed in Thread: MSPM0G3507 Tool/software: I'm using the SDK example rtc_periodic_alarm_lfosc_standby_LP_MSPM0G3507_nortos_ticlang , which demonstrates the use of Standby0 mode. This mode is working as expected…
Hi Avanish,
Avanish Kumar said: Accidentally, while programing application s/w address got selected as 0x00 (which I suppose BSL code starts)
Are you using the BSL demo in SDK, or you are using ROM BSL to flash the device? What is the program address…
Part Number: MSPM0G3507 Tool/software:
Hi TI
May I ask if the TI LP-MSPM0G3507 can be used with the FUSION_DIGITAL_POWER_DESIGNER software to communicate with the MSPM0G3507 via PMBus?
What hardware device is needed on the computer side…
Part Number: LP-MSPM0G3507 Tool/software: Hello,
I have a question about working with UART. When the UART receiver section is disabled, the end of transmission flag does not seem to work. Could you please explain why this happens?
I am using the UART…
Part Number: LP-MSPM0G3507 Tool/software: Hello,
I am using TIMG7 in input capture mode. I want to reset TIMG7 upon detecting a rising edge. I tried disabling and re-enabling TIMG7, but it did not work. Is there a way to reset the timer counter to zero…
Part Number: LP-MSPM0G3507 Other Parts Discussed in Thread: MSPM0G3507 Tool/software: Hello,
I would like to know what configurations are needed to perform square root, for example the square root of the number 9
MATHACL->CTL = MATHACL_CTL_FUNC_SQRT…
Part Number: LP-MSPM0G3507 Tool/software:
What does this Error means and how to Resolve this , I have tried hard reseting But still this Error i appearing
Part Number: LP-MSPM0G3507 Other Parts Discussed in Thread: SYSCONFIG Tool/software: Hi support,
I am new to TI controller. I need to know how to write nibble DOUT3_0 all together. I dint found any function in DL_GPIO.h file. I tried to write my own…